Removing
1. We prepare the car for work («Preparing the car for maintenance and repair»).
2. Use the power window handle to lower the door glass.
3. Remove the door trim («Door upholstery - removal and installation»).
4. Prying with a screwdriver, remove the inner glass seal.
5. Having removed the seal from the door frame, use a Phillips screwdriver to unscrew the self-tapping screw securing the glass lining.
6. Prying off the upper edge of the lining with a screwdriver, remove the lining.
7. Using an 8 mm key, unscrew the glass guide mounting bolt.
8. Remove the lower end of the seal from the guide and remove the guide from the door.
9. Prying with a screwdriver, we put forward the retainer of the outer glass seal.
10. Remove the door frame seal.
11. Disconnect the glass from the power window («Window regulator - removal and installation»).
12. Remove the glass from the door.
Installation
Install glass in reverse order.