Removing
1. Partially drain the coolant so that the liquid level is below the expansion tank («Coolant - replacement»).
2. Remove the battery («Battery - removal and installation»).
3. Remove the rubber mat from the shelf. Using a 13 mm socket wrench, unscrew the four bolts securing the shelf to the brackets and remove the shelf.
4. Disconnect the cooling system hose from the expansion tank.
5. Using a 13 mm wrench, unscrew the two nuts securing the outer bracket of the shelf to the side member and remove the bracket, removing the bracket from its hole.
6. Using the same wrench, unscrew the two nuts securing the inner shelf bracket to the body mudguard.
Installation
Install the shelf in reverse order. Top up the coolant to the correct level («Coolant - replacement»).