Removing
1. We prepare the car for work («Preparing the car for maintenance and repair»).
2. Open the glove box.
3. We press up the stops...
... we disengage two limiters made on the back wall of the glove box.
4. Remove the glove box by disengaging its lower stops from engagement with the axles.
5. Under the instrument panel on the right, pressing the latch, disconnect the wire block from the additional resistor.
6. Using a Phillips screwdriver, unscrew the two screws securing the resistor.
7. Remove the resistor.
Installation
Install the additional resistor in reverse order.