Removing
1. We prepare the car for work («Preparing the car for maintenance and repair»).
2. Unscrew the nut of the stabilizer strut bolt to the lower arm of the front suspension (see from 117, «Anti-roll bar - strut replacement») and knock out the bolt from the holes of the rack and lever.
Similarly, we take out the bolt connecting the stabilizer strut with the right suspension arm.
3. Using a 13 mm socket wrench with an extension, unscrew the two nuts securing the bracket of the left stabilizer bar cushion to the body.
Similarly, we unscrew the nuts securing the bracket of the other stabilizer bar cushion to the body.
4. Remove the stabilizer bar assembly with struts and pillows.
Disassembly
1. Remove the rack from the bar.
2. In any way possible (marker, sticky tape) mark the place of installation of pillows on the bar.
3. Remove the pillow from the rod, having previously removed the stabilizer rod mounting bracket from the carrier.
Installation
Install the stabilizer in reverse order.
Recommendation. To facilitate the installation of cushions and racks, apply soapy water to the bar.