The car comes with two ignition keys
Ignition switch key with black
The car comes with two ignition keys (pic. 1a) with special encoders built into the key head. The ignition switch key with a black mark on the end combines the functions of:
- key locks doors and trunk lid;
- ignition switch key;
- immobilizer working key*.
* The immobilizer blocks the engine start and provides additional protection for the vehicle against unauthorized use. Remember that the immobilizer is only an additional barrier on the way of an intruder and does not provide absolute and complete protection of your car from unauthorized use.
In the variant version, instead of the ignition switch key with a black mark on the end, a key with a remote control is attached to the car (pic. 1b), which also performs all of the above functions.
The key with a red label combines the functions of:
- key locks doors and trunk lid;
- ignition switch key;
- immobilizer learning key.
The key code number is printed on the tag. Remove and save the tag. By this number, you can make a new key by contacting a certified PSSS.
Production of new ignition switch keys to replace the lost ones is carried out at the expense of the consumer.
Attention! The ignition switch key with a red mark on the end must be stored separately and not worn on the same bundle with the working key and used only if the working key is lost.