Removing
1. We prepare the car for work («Preparing the car for maintenance and repair»).
2. Remove the air filter and its air duct («Air filter - removal and installation»).
3. Remove the clamp that secures the cooling system hose to the fan shroud.
4. Using a 10 mm socket head, unscrew the two bolts of the upper fastening of the electric fan casing to the radiator.
5. At the bottom, by pressing the latch, disconnect the wiring harness block from the electric fan.
6. Carefully remove the electric fan from the engine compartment, disengaging its casing from the radiator.
Disassembly
1. Disconnect the fan motor wiring harnesses from the shroud.
2. Using a Phillips screwdriver, unscrew the three screws securing the motor to the casing.
3. Remove the casing from the electric motor.
4. If necessary, remove the impeller, pry it with a screwdriver and remove the retaining ring from the motor shaft.
5. Remove the plate.
6. Remove the impeller from the motor shaft.
Assembly and installation
We assemble and install the electric fan in the reverse order.