2. Remove the fuel pump circuit fuse («Mounting block - replacing fuses and relays»).
Comment. You can disconnect the wiring harness from the fuel module («Fuel module - removal and installation»).
3. Turning on the starter, turn the crankshaft for 10-15 s.
'Comment. If the engine starts at the same time, we wait until all the gasoline is exhausted from the fuel line and the engine stalls.
4. Turn off the ignition.
5. Install the fuse in place and close it with a lid.
Warning! After depressurizing, a small amount of gasoline remains in the fuel line. Keep it away from hot parts.