1. Disconnect the wire from the terminal «minus» battery.
2. Pry off the rear door window handle retainer...
3.... and remove the power window handle along with the washer.
4. Press the handle for opening the rear door, unscrew the screw of its fastening...
5.... and remove the handle from the rear door lock drive.
6. Turn out the button of blocking of the lock of a back door.
7. Remove the decorative cap of the upper handle fixing screw and unscrew it.
8. Remove the decorative cap, unscrew the lower bolt of the handle...
9. Remove the rear door handle.
10. Press the back door trim with a screwdriver so that the plastic holders come out of the holes in the door. Insert the screwdriver as close as possible to the holders, otherwise the trim may be damaged...
Note. Tailgate trim (view from the back) attached to the door panel with plastic holders. If the holders are damaged, replace them with new ones.
11.... and remove the trim from the door.
12. Install the rear door trim on the car in the reverse order, replace the damaged plastic holders with new ones.