Car steering Lada Kalina 1

Steering design features
The car is equipped with safety steering, with rack and pinion steering, electric power steering, adjustable in height (angle of inclination) steering column and damping element on the steering...

Inspection and steering check
At each maintenance of the car, check the condition of the anthers of the steering gear 7 (see fig. 7.1), boot 27 tie rod joints and tightness of their fit. Anthers must be replaced in the presence...

Steering malfunctions, their causes and solutions
Cause of malfunction Remedy Increased steering wheel play Loosening of nuts of fastening of spherical fingers of steering draughts Increased clearance in ball joints of steering rods Wear of silent...

Removal and installation of a steering wheel
To remove and install the steering wheel on a car, you will need: a flat-blade screwdriver, a hex wrench «for 4». 1. Disconnect the wire from the terminal «minus» battery. 2. Set the steering wheel...

Removal and installation of electric power steering
To remove and install the electric power steering on a car, you will need: screwdrivers with a flat and Phillips blade, a wrench «at 12», two keys «at 13», socket wrench «at 13». 1. Disconnect the...

Removal and installation of a cardan shaft of a steering
To remove and install the steering propeller shaft on a vehicle, you will need: a flat-blade screwdriver, a wrench «at 13». 1. Turn away a nut and take a collar bolt fastening the top and bottom...

Removal, installation of an external tip of steering draft and replacement of an anther of the spherical joint
With increased free play of the steering wheel on the car, check the axial and radial clearances in the ball joints of the steering rods. If the ball joint feels loose or corroded on the ball stud,...

Removal and installation of an internal tip of steering draft
To remove and install the inner tie rod end on a vehicle, you will need: a flat blade screwdriver, wrenches «on 10», «at 13», «at 15». 1. Disconnect the wires from the battery terminals and remove...

Removal and installation of the steering mechanism
To remove and install the steering gear on a car, you will need: a flat-blade screwdriver, a knife, a socket wrench «at 13». 1. Remove both front wheels from the vehicle. 2. Remove the battery (see «...