1. Disconnect the wire from the terminal «minus» battery.
2. Remove the right side lining of the floor tunnel (see «Removal and installation of floor tunnel linings»).
3. Turn away a nut of fastening of an arm of the relay...
4.... and remove the bracket assembly with the relay and fuse for the electric fan of the engine cooling system.
5. Remove the engine cooling fan fuse from its socket and replace it with a new one.
6. Turn off a nut of fastening of the relay of inclusion of the electrofuel pump...
7.... remove the fuel pump relay from the connector and replace it.
8. Other relays of inclusion of the electric motor of the fan and the main relay of system of injection of fuel replace similarly.
9. Remove the plastic cover of the diagnostic connector and fuses of the fuel injection system...
10.... and remove the blown fuse.
11. Install a new fuse in the mounting block in the reverse order of removal.
Fuse body color and rating
| Current strength, A | Fuse body color |
| 50* | Red |
| 30 | Green |
| 25 | Beige |
| 20 | Yellow |
| 15** | Blue |
| 10 | Red |
| 7,5 | Brown |
| 5 | Orange |
* The 50A fuse has the same color as the 10A fuse but is oversized.
** It is also used in the engine management system.