Car clutch and drive shafts Lada Kalina 1

Clutch Design Features
The clutch on the car Lada Kalina is installed single-disk, dry, permanently closed, with a central pressure spring 11 (pic. 5.1) and a torsional vibration damper on the driven disk 7. The clutch...

Clutch malfunctions, their causes and solutions
Cause of malfunction Remedy Incomplete clutch disengagement (clutch «leads») Insufficient full travel of the clutch pedal Warping of the clutch disc (end runout more than 0.5 mm) Jamming of the hub...

Removal, installation and repair of clutch
To remove and install the clutch on the car you will need: «for 8» (more comfortable socket head), large screwdriver, mandrel for centering the clutch disc (can be made from the input shaft of the...

Replacing the clutch release bearing
1. Remove the gearbox from the car (see « Removal and installation of a transmission »). 2. Disengage the ends of the spring clip from engagement with the clutch release bearing. 3. Remove the clutch...

Replacing the clutch release fork
To replace the clutch release fork, you will need: a screwdriver, pliers. 1. Remove the clutch release bearing (see « Replacing the clutch release bearing »). 2. Carefully prying off the boot 1 of...

Replacing the clutch release cable
To replace the clutch release cable on a vehicle, you will need: «for 8», caliper or ruler. 1. Inside the car under the dashboard (operation for clarity is shown with the instrument panel removed)...

Features of the design of the front wheel drives
On a car, the drive of each wheel consists of two joints of equal angular velocities and a shaft 12 (pic. 5.8), which is made of a bar for the left wheel drive, and from a pipe for the right wheel...

Removal and installation of front wheel drives
To remove and install front wheel drives on a car, you will need: socket wrenches (heads) «at 17», «at 30», mounting blade, hammer. 1. Drain the gearbox oil (see « Changing the oil in the gearbox »)....

Replacing CV joints (constant velocity joints)
To replace Replacement CV joints (constant velocity joints) by car you will need: pliers, screwdriver, hammer, soft metal drift. 1. Remove the front wheel drive from the car (see « Removal and...