Interior (internal body elements) Lada Kalina 1

Internal rear-view mirror — removal and installation
The interior rearview mirror is glued to the windshield. When replacing the windshield, the mirror must be reinstalled. To perform this work, you need a special glue for glass. On sale there are...

Floor tunnel lining — removal and installation
Removing 1. We prepare the car for work and disconnect the terminal from the negative terminal of the battery (see « Preparing the car for technical inspection and repair »). 2. Remove the gear lever...

Dashboard console overlay — removal and installation
Removing 1. We prepare the car for work and disconnect the terminal from the negative terminal of the battery (see « Preparing the car for technical inspection and repair »). Comment. If the car has...

Instrument panel — removal and installation
Comment. On cars of the first releases, the instrument panel can be dismantled by first removing the instrument panel and other removable parts from it. On late production cars (equipped with a front...

Interior ventilation and heating system: reference data
Table 15.1. Basic data for control, adjustment and maintenance

Interior ventilation and heating system: design description
The ventilation and heating system of the car interior is a supply and exhaust system, while the temperature of the liquid heated above 90°C from the engine cooling system is used for interior...

Checking the technical condition of the ventilation and heating system
1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. We start the engine. 3. Turn the knob of the air temperature regulator counterclockwise to the extreme...

Cabin ventilation and heating filter — replacement
Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Remove the right side of the air intake grille (see « Air intake grill - removal »). 3. Using a...

Additional resistor — check and replace
You will need a multimeter to do the job. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Inside the shelf of the instrument panel, use a slotted...

Heater radiator — removal and installation
You will need a multimeter to do the job. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Remove the instrument panel assembly with the heater (see...

Heater fan — removal and installation
Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Remove the instrument panel assembly with the heater (see p. 202, « Instrument panel - removal and...