Anti-roll bar — strut replacement

To perform the work, an inspection ditch or overpass is required.

Removing

1. We prepare the car for work (see «Preparing the car for maintenance and repair»).

2. Using two 17 mm wrenches, unscrew the nut of the stabilizer strut bolt to the transverse arm.



3. Using a beard of a suitable diameter, we knock out the bolt from the rack and lever.



4. Lubricate the end of the stabilizer bar with soapy water.

5. We insert a beard into the hole of the lower silent block and, using it as a lever, turn the rack from side to side, gradually moving it to the edge of the bar.



6. Remove the rack from the bar.



Similarly, remove the rack from the other end of the stabilizer bar.

Installation

We install the racks in the reverse order, after lubricating the ends of the stabilizer bar with soapy water.