Wheels, tires and hubs of the car Lada Kalina 1

Wheels, tires and hubs: reference data
Table 10.1.1. Basic data for control, adjustment and maintenance * The upper value is for manufacturer-installed wheels, and the lower value is for permitted installation. Table 10.1.2. Tightening...

Wheels, tires and hubs: design description
On a car with a 16-valve engine, the manufacturer sets the wheels (discs) for tubeless tires 5Jxl3H2 ET 35, 5JX14H2 ET 35 or 5½Jxl4H2 ET 35, where: 5 (51 /2) - rim width in inches; J - symbol of the...

Checking the technical condition of wheels, tires and hubs
To do the job, you will need a caliper with a depth gauge. Execution sequence 1. Before each trip, we carefully inspect the wheels of the car and their fastening elements. Each wheel is attached to...

Tires — pressure check
Advice. Check the air pressure in the tires every 500 km of the vehicle. The air pressure in a car tire is not constant. When the ambient temperature rises, the pressure in the tire increases, and...

Front wheel bearing — replacement
The bearing of a nave of a forward wheel unadjustable. If there is play in the bearing, it must be replaced. An assistant is needed to complete the work, and you will also need: reliable support...

Rear wheel bearing — replacement
To complete the work you will need: two- or three-jaw puller; a stripper of internal lock rings; cup puller. Removing 1. We prepare the car for filling work (see « Preparing the car for maintenance...