Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Disconnect the tips of the two wires from the switch terminals.
3. Using a 19 mm spanner, loosen the switch locknut. Unscrew the switch from the pedal bracket.
Recommendation. It is possible to check the serviceability of the switch with an ohmmeter or using a test lamp. When the button is in the free position, the switch contacts must be closed, and when the button is pressed, open. A defective switch must be replaced.
Installation
1. Install the brake light switch in reverse order.
2. After installing the switch, before connecting the wire connectors, check and, if necessary, adjust the position of the brake pedal (see «Free travel of the brake pedal - adjustment»).
Warning! After connecting the wires, make sure that when you lightly press the brake pedal, the brake lights turn on. Otherwise, check the wire connection to the switch terminals or repeat the adjustment.