Removing
1. Remove the engine mudguard or crankcase protection (if installed).
2. Drain the oil from the engine (see «Engine oil and oil filter - change»).
3. Using a 10 mm socket wrench, unscrew the three bolts and remove the bottom cover of the clutch housing.
4. Using a 10 mm key, unscrew the 16 bolts securing the engine oil pan.
Comment. Figured washers are installed under the heads of the pallet bolts - do not lose them.
5. Remove the pan and pan gasket.
Installation
We install the pallet in the reverse order, replacing the damaged or lost elasticity gasket.
To evenly distribute the gasket, we wrap the crankcase mounting bolts in the direction from the middle to the edges.