Car exhaust system Lada Kalina 1

Tightening torques for threaded connections of elements of the exhaust system
Table 8.5.1

Description of the design of the exhaust system
The exhaust system consists of an exhaust manifold, a front pipe, a main and an additional muffler and is equipped with a catalytic converter. The engine complies with Euro III emission standards....

Check of a technical condition of system of release of the fulfilled gases
During the operation of the car, the elements of the exhaust system are exposed to high temperatures, exhaust gases, ash, snow and reagents that top up the road in winter, as well as vibration....

Suspension of the exhaust system — replacing pillows
Comment. The suspension pads of the main and additional mufflers are interchangeable. You can replace them in any order. To perform the work, an inspection ditch or overpass is required. Execution...

Main muffler — replacement
To perform the work, an inspection ditch or overpass is required. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). Attention! To avoid burns, work...

Additional muffler — replacement
To perform the work, an inspection ditch or overpass is required. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). Attention! To avoid burns, work...

Catalytic manifold — removal, gasket replacement and installation
To perform the work, an inspection ditch or overpass is required. Removing 1. We prepare the car for work (see « Preparing the vehicle for maintenance and repairs »). 2. Remove the engine mudguard or...