With a marker we mark the position of the lower door lock relative to the inner panel of the door.
Similarly, we mark the position of the upper door lock.
Using the Torx T-30 key, we unscrew the two screws securing the lower lock to the inner door panel.
We remove the lower lock from the inner panel of the door and use pliers with thin sponges to remove the tip of the lock drive cable sheath from the groove of its base.
We combine the lower lock drive cable with the groove in the lock lever...
... remove the tip of the cable from the hole in the lever and remove the lower door lock.
We carry out similar operations when removing the upper door lock.
To remove the lock drive, remove the upholstery of the right tailgate
With a Torx-30 key, we unscrew the two screws securing the lock drive to the inner panel of the door.
We take out the door lock drive together with the cables of the upper and lower locks through the technological hole in the inner door panel.
The drive of the locks of the right tailgate with cables: 1 - the cable of the upper lock drive; 2 - lock drive; 3 - lower door lock drive cable.
If it is necessary to replace the upper lock drive cable...
... pliers with thin jaws...
... we remove the cable from the groove of the base of the door lock drive...
... and, aligning the cable with the groove of the lever, we remove the tip of the cable from the lever. Replacing the lower lock drive cable is done in the same way.
We install the locks and the drive of the right tailgate in the reverse order.