Exterior (external body parts) Lada Largus 1

Description of body structure
Body details: 1 – luggage compartment door left; 2 – luggage compartment door right; 3 - rear bumper; 4 - right side glass of the rear compartment; 5 – back door right; 6 - front door right; 7 -...

Detailing of body parts
Note: for a complete detailing of the body with names and articles, see also the spare parts catalog here. 1. Front body panel; 2. Central bracket of the front panel of the body; 3. Lower extreme...

Control dimensions of the body, gaps, attachment points
see also dimensions , Internal dimensions of cabin and trunk , Gaps and sections of parts . Dimensions of openings and clearances of mating parts of the Largus body A B IN G D E AND 3 1380 ± 5 930 ±...

Gaps between body parts, sections and connection profiles
1. (X1) = 0.75 mm±0.75 mm 2. (x2) = 2 mm±1 mm 3. (HZ) = 8 mm±1.5 mm 4. (X4) = 4 mm±1.5 mm 5. (X5) = 8 mm±1.5 mm 6. (X6) = 8 mm±1.5 mm 7. (X7) = 4 mm±1.5 mm 8. (X8) = 5 mm±1.5 mm 9. (X9) = 16 mm±2 mm...

Front bumper mudguard — removal and installation
Removing Put the car on a two-post lift and brake it with the parking brake (electrohydraulic lift type P-3.2 G). Open the hood and disconnect the wire terminal "masses" from the battery. Raise the...

Removing mudguards and fender liner front and rear wheel arches
Note. mudguard part numbers see here , fender liner and their fasteners, clips, etc. see here . Removing the front fenders is also shown Here . For front wheel mudguard removal perform the following...

Wing front — removal and installation
Note. For catalog numbers of the front fenders and their mountings, see here . Removing We put the car on the handbrake. Disconnect the battery terminal. Jacking up the car (or raise on a lift to a...

Front bumper — removal and installation
Removing Put the car on a two-post lift and brake it with the parking brake (electrohydraulic lift type P-3.2 G). Open the hood and disconnect the wire terminal "masses" from the battery. Raise the...

Rear bumper — removal and installation
Removing Put the car on a two-post lift and brake it with the parking brake (electrohydraulic lift type P-3.2 G). Open the hood and disconnect the wire terminal "masses" from the battery. Raise the...

Engine crankcase protection — removal and installation
Note. for catalog numbers of the protection and its fastening bolts, see Here . Note. the original bolts are M6, and as a result of their often unreasonably high cost, they are successfully replaced...

Body anti-corrosion treatment
Hidden cavities for anti-corrosion treatment The anti-corrosion compound is injected at the points indicated in the figures: 1, 2, 3 and 4 - to protect the connection of the lining of the lower...