Interior (internal body elements) Lada Largus 1

Removal and installation of seats
Removing the front seat (right or left) Move the seat to the rearmost position. Remove two bolts 1, Figure 9-1, front fastening of the skid to the body (interchangeable head Torx Т30, knob). Move the...

Seat belts — removal and installation
Removing the front right or left seat belt Set the car to work. Remove the covers and caps from the heads of the seat belt mounting bolts (flat screwdriver). Loosen bolt 3, Figure 10-1, lower belt...

Seat squeak and seat belt buckle fixes
Many owners of Lada Largus face extremely annoying seat creaking while driving. There are several ways to troubleshoot this issue. First, make sure that it is the creaking of the seats: it happens...

Removing the lining of the floor tunnel (rear and front)
You will need: T20 TORX key, socket head «on 10», a special plastic mounting spatula or a flat-bladed screwdriver. To remove the rear... 1. Disconnect «minus» battery. 2. Pry off the rear power...

Sheathing (facing) of the cabin — removal and installation
Removing Set the car to work. Remove from the right and left sides the upholstery 2, Figure 11-1, pillars of the loading door, upholstery 3 of the rear pillar. Figure 11-1 - Pillar upholstery: 1 -...

Instrument panel — removal and installation
Removing Set the car to work. Raise the hood, disconnect the wire terminal "masses" from the battery. Figure 12-1 - Instrument panel assembly: 1 - upholstery of the wind window pillar, left: 2 -...

Armrest of the third row of seats — removal and installation
Removing Remove the upholstery on the right and left sides 2 (see figure 11-1) rack loading door, upholstery 3 rear rack. Unscrew two self-tapping screws 1, Figure 18-1, and, overcoming the...

Removing the luggage compartment side shelf
We carry out work when removing the rear suspension shock absorber. Operations are shown on the left side shelf of the luggage compartment. We display the mesh frame for transporting small items from...

Body bulkhead — removal and installation (cargo van)
Removing Set the car to work. Raise the hood, disconnect the wire terminal "masses" from the battery. Remove the cap from the head of the bolt 1, fig. 19-1, the top anchor point of the seat belt on...

Load compartment floor — removal and installation (cargo van)
Removing Set the car to work. Raise the hood, disconnect the wire terminal "masses" from the battery. Remove body bulkhead. Unscrew twenty-four screws 1, Figure 20-1, and 7 screws 2 securing the...

Spare wheel mounting — removal and installation
Part numbers for these parts see here . Removing Place the vehicle on a two-post lift, apply the parking brake and turn off the ignition. Figure 2-1 - Removing the spare wheel basket: 1 - a bolt of...