Rear seats of the first row: functionality
Access to the second row rear seats
 |  |
From the rear doors:
- lower the seat headrest;
- lower the backrest onto the seat cushion and raise the folded seat;
- sit in the back seat of the second row;
- lower the cushion of the rear seat of the first row;
- raise the seatback.
It is forbidden to drive a car in which the rear seat of the first row or its backrest is folded down, while the rear seat of the second row is occupied by a passenger.
To fold down rear outboard seat A and bench seat B
- Lower the head restraints if the car is equipped with them;
- lower handle 1 (see above)
- fold the backrest onto the seat cushion;
- raise the seat to an upright position.
When moving the rear seats, make sure there are no objects in the mounting area (there should be no pebbles, rags, toys, etc.).
To unfold the outboard and bench seats
- Lower the seat until it locks into place;
- raise your backs;
- make sure the seat cushions and backrests are securely fixed.
Check the correct installation and operation of the rear seat belts after each movement of the rear bench seat.
For safety reasons, make all seat adjustments only when the vehicle is stationary.
Second row rear seats: functionality
To fold down the seats
Remove the head restraints if the vehicle is equipped with them.
Pull handles 1 and lower the seatbacks.
The rear seats can be folded down when carrying bulky items.
Pull the belt 2 to raise the seat cushion to a vertical position.
For safety reasons, make all seat adjustments only when the vehicle is stationary.
Check the correct installation and operation of the rear seat belts after each movement of the rear bench seat.
- fold the seat backs;
- pulling the belt 3, raise the seat cushion to a vertical position;
- open latches 4 and 5;
- lift the seat up.
To install the seats
- lower the seat cushion until it locks;
- raise your backs;
- make sure the seat cushions and backrests are securely fixed.
When moving the rear seats, make sure there are no objects in the mounting area (there should be no pebbles, rags, toys, etc.).
How to fold the rear seats to equip a berth
I offer a convenient option for transforming the interior of a seven-seater Largus. Fold down the backrests of the second row seats and raise the cushion until the back of the backrest is in a horizontal position. We fix this position with the help of, for example, a jacket rolled into a roll or a blanket.
We do the same with the third row. We fill the space between the seats and the trunk with belongings.
If there are not enough things, cover the gap between the rows with a sheet of plywood measuring 500x700x6 mm. The length of the bed is maximum, and the luggage does not need to be shifted if it is necessary to change the place of lodging for the night.