Attention! To prevent damage to the instrument cluster glass, do not clean it with solvents.
You will need Phillips and flat blade screwdrivers.
1. Disconnect the wire from the terminal «minus» battery.
2. Lower the steering column all the way down, remove the steering wheel (see «Removal and installation of a steering wheel») …
3.... and the cover of the fuse and relay box (see «Replacing fuses and relays in the mounting block»).
4. Turn out four screws of fastening of a guard of the panel of devices …
5.... and remove the shield from the instrument panel (for clarity, the work is performed with partial disassembly of the steering column).
6. Turn out two screws of fastening of a combination of devices to the panel of devices …
7.... and remove it from the nest.
8. Pry and turn the clamp of the instrument panel wiring harness block..
9.... and, having disconnected the block from the terminals of the instrument cluster, remove the instrument cluster from the car.
Note. This is what the instrument cluster looks like removed from the car.
10. Establish a combination of devices in an order, the return to removal.
Attention! When connecting the wiring harness to the terminals of the instrument cluster, be careful not to damage the terminals.