Checking the level and adding fluid to the washer reservoir

You will need: in summer - a concentrate of a special fluid for the washer reservoir, diluted with clean water; in winter - non-freezing liquid.

Note. Use a reputable brand antifreeze that does not contain hazardous methanol.

Note. To save money, do not dilute the antifreeze when the ambient temperature rises. In addition to an increase in the freezing point of a diluted liquid, its washing properties deteriorate sharply

Attention! The manufacturer does not recommend the use of ordinary water to fill the washer reservoir.

Attention! Freezing of the liquid in the washer reservoir can lead to the destruction of both the reservoir itself and the washer motor!

The washer reservoir is located in the engine compartment in front of the expansion tank and is attached to the mudguard of the left front fender.



1. Unscrew the reservoir cap.



2. Remove the plastic strainer..




3.... and add liquid to the lower edge of the reservoir neck, then screw the cap on.



4. If the washer jet is clogged, clean it with a sewing needle. It can be used to adjust the direction of the washer fluid jet.

Attention! Use only non-hardened needles or pins to clean and adjust the jet. The broken tip of the hardened needle cannot be removed from the jet hole.