Doors, locks and windows of the car Lada Vesta 1

Windshield — minor damage repair
During the operation of the car, damage to the windshield is possible (chips, cracks). If the damage has a significant area, located in the driver's field of view, the glass must be replaced. Small...

Windshield — replacement
To complete the work, you will need: a glass gluing kit, a sharply sharpened knife, a glue gun, a string for cutting glue-sealant, a heated room in which you can leave the car motionless while the...

External rear-view mirror — removal and installation
It is necessary to replace the mirror assembly in case of damage to the housing or the adjustment mechanism. Execution sequence 1. We prepare the car for work (see « Preparing the car for maintenance...

Front door upholstery — removal and installation
We remove the upholstery to repair or replace the equipment installed in the door, as well as to repair the door itself. Recommendation. Before starting work, purchase several spare door upholstery...

Front door inner handle — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - checking the technical condition »). Execution sequence 1. We prepare the car for...

External front door handle — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - technical condition check and maintenance »). Execution sequence 1. We prepare the...

Front door lock — removal, installation and adjustment
We remove the door lock if its mechanical part, the rods of its drive, the limit switch or the lock solenoid break down. The door lock is a non-separable unit, therefore, in case of failure, it is...

Front door window regulator — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - checking the technical condition »). Execution sequence 1. We prepare the car for...

Front door glass — removal, installation and adjustment
1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Remove the upholstery of the front door (see « Front door upholstery - removal and installation »). 3. We...

Front door limiter — removal and installation
The limiter prevents excessive opening of the door and fixes it in the open position. Warning! If during the repair process it was necessary to remove the door stop, be careful. Without limiter...

Tailgate upholstery — removal and installation
We remove the upholstery to repair or replace the equipment installed in the door, as well as to repair the door itself. Recommendation. Before starting work, purchase several spare door upholstery...

The external handle of a back door — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - checking the technical condition »). Execution sequence 1. We prepare the car for...

Rear door lock — removal, installation and adjustment
We remove the door lock if its mechanical part, the rods of its drive, the limit switch or the lock solenoid break down. The door lock is a non-separable unit, therefore, in case of failure, it is...

Rear door window regulator — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - checking the technical condition »). Execution sequence 1. We prepare the car for...

Rear door glass — removal and installation
The need to perform work is determined during the inspection of the technical condition of the body (see « Body - checking the technical condition »). Execution sequence 1. We prepare the car for...