Recommendation. Before starting work, purchase several spare door upholstery holders, as the holders often break during the dismantling process.
Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Using the TORX T20 key, unscrew the lower mounting bolt.
3. With a thin slotted screwdriver, squeeze the latches...
...and remove the handle cover.
4. With a 10 mm key, unscrew the two mounting bolts.
5. Remove the power window key (see «Power window key - replacement»).
6. Next, starting from the bottom, applying a little effort, alternately disconnect the upholstery holders from the door panel.
7. Disconnect the upholstery from the glass seal.
8. Upholstery fastened with five holders.
9. We check their condition and replace the faulty ones.
10. Install the parts in reverse order.