Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the air intake grille (see «Windshield wiper - removal and installation»).
3. We shift the stopper of the latch.
4. Press the block lock and disconnect the block of the wiring harness from the electric pump.
5. Using a 10 mm key, unscrew the tank mounting bolt.
6. Disconnect the washer tube from the tank.
7. Disconnect the tube from the electric pump. If there is a large amount of washer fluid in the reservoir, first raise the reservoir (see below) and drain the washer fluid into the container through the filler neck.
8. We remove the stop of the tank from the hole in the wing...
...and remove the tank.
9. Remove the electric pump from the tank (see above, «Windshield washer pump - check and replace»).
Installation
Install the tank in reverse order.