Removing
1. We prepare the car for work and install it on a viewing ditch or overpass (see «Preparing the car for maintenance and repair»).
2. Disconnect the wire terminal from the negative terminal of the battery (see «Battery - removal and installation»).
3. Remove the engine mudguard (see «Mudguard of the engine - removal and installation»).
4. Press the latch and disconnect the wire block from the generator.
5. Using a 13 mm wrench, unscrew the nut securing the power wire and disconnect the wire from the starter.
6. Using the TORX E10 key, unscrew the three mounting bolts.
Comment. Third mounting bolt.
7. Remove the starter.
Installation
Install the starter in reverse order.