Car exhaust system Lada Vesta 1

Tightening torques for threaded connections
Table 9.5.1. Tightening torques for threaded connections Name of units and parts Tightening torque, Nm (kgf·m) Nuts of fastening of a final collector 21-25 (2,1-2,6) Nut of fastening of a reception...

Exhaust system design description
Exhaust system: 1 - gasket; 2 - catalytic converter; 3 - sealing gasket; 4 - vibration isolating clutch; 5 - additional muffler; 6, 10 - silencer suspension cushions; 7 - catalytic manifold bracket;...

Check of a technical condition of system of release of the fulfilled gases
During the operation of the car, the elements of the exhaust system are exposed to high temperatures, exhaust gases, water, snow and reagents that are poured over the road in winter, as well as...

Suspension of the exhaust system — replacing pillows
Comment. Pillows of a suspension bracket of the main... ...and additional mufflers are not interchangeable. To perform the work, an inspection ditch or overpass is required. Execution sequence 1. We...

Main muffler — replacement
To perform the work, an inspection ditch or overpass is required. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). Attention! To avoid burns, work...

Additional muffler — replacement
To perform the work, an inspection ditch or overpass is required. We work with an assistant. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). Attention!...

Catalytic manifold — removal, gasket replacement and installation
To perform the work, an inspection ditch or overpass is required. Removing 1. We prepare the car for work (see « Preparing the vehicle for maintenance and repairs »). 2. Remove the engine mudguard...