Warning! Do not remove both drives at the same time or, if necessary, install a special mandrel instead of one of them to prevent the side gears from falling out of the differential box.
Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Drain the oil from the gearbox (see «Automated Transmission - Oil Change»).
3. We take out the drive (see «Front wheel drive - removal and installation»).
4. Prying the stuffing box with a large slotted screwdriver or mounting spatula, remove it from the gearbox housing.
Installation
We lubricate the working edge of the new oil seal with gear oil and press it in, using the old oil seal as a mandrel.
The second wheel drive seal is replaced in the same way.
